doi: 10.17586/2226-1494-2020-20-4-500-506


METHODS OF HOT WIRE CREATION FOR FIBER-OPTICAL THERMAL ANEMOMETER

V. A. Novikova, S. V. Varzhel


Read the full article  ';
Article in Russian

For citation:
Novikova V.A., Varzhel S.V. Methods of hot wire creation for fiber-optical thermal anemometer. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2020, vol. 20, no. 4, pp. 500–506 (in Russian). doi: 10.17586/2226-1494-2020-20-4-500-506


Abstract
Subject of Research. The paper presents the study of various methods of optical radiation coupling from the fiber core into its cladding with the aim of creating a fiber-optic anemometer hot wire. The effectiveness of the described methods is evaluated by analyzing the obtained dependencies. Method. The structures of two optical fibers were studied, one of which was used to transmit an information signal, and the other — to create a hot wire. A Bragg grating was formed in the core of the first fiber, and a radiation coupling region was created in the second fiber. These fiber sections were aligned with each other and fixed by a tin-lead alloy. The temperature was measured by monitoring the spectral characteristics of fiber Bragg gratings inscribed by the phase mask method. The areas of radiation coupling were formed either by changing the fiber geometry using custom modes of the arc fusion splicer, or by creating a SMF-MMF-SMF transition. Main Results. Structures are developed which can be used as a hot wire of a fiber-optic anemometer sensitive element. The dependencies of the Bragg resonance wavelength shift on the pump laser power are obtained; the Bragg wavelength shift varies in the range from 0.15 nm to 3 nm as a result of a hot wire creation. The resulting curves are constructed after three experiments for each type of structure, taking into account the standard deviation. They make it possible to judge the effectiveness of various methods of radiation coupling. Comparative analysis of the studied methods is presented. Practical Relevance. The study describes the capabilities of fiber-optic anemometry when creating point and distributed sensors. The results of this work can be used in the areas where the creation of quasi-distributed and point diffusers is necessary, as well as partial or complete coupling of radiation from a fiber core.

Keywords: anemometer, hot wire method, thermal anemometry, fiber Bragg grating, fiber optic sensors

Acknowledgements. This study has been performed at ITMO University in the framework of research work No. 619297 “Development of methods and facilities for solving applied problems of photonics”.

References
1. Hill K.O., Fujii Y., Johnson D.C., Kawasaki B.S. Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication. Applied Physics Letters, 1978, vol. 32, no. 10, pp. 647–649. doi: 10.1063/1.89881
2. Meltz G., Morey W.W., Glenn W.H. Formation of Bragg gratings in optical fibers by a transverse holographic method. Optics Letters, 1989, vol. 14, no. 15, pp. 823–825. doi: 10.1364/OL.14.000823
3. Gao S., Zhang A.P., Tam H.-Y., Cho L.H., Lu C. All-optical fiber anemometer based on laser heated fiber Bragg gratings. Optics Express, 2011, vol. 19, no. 11, pp. 10124–10130. doi: 10.1364/OE.19.010124
4. Zhou B., Jiang H., Lu C., He S. Hot cavity optical fiber fabry-perot interferometer as a flow sensor with temperature self-calibrated. Journal of Lightwave Technology, 2016, vol. 34, no. 21, pp. 5044–5048. doi: 10.1109/JLT.2016.2612657
5. Zhang Y., Wang F., Liu Z., Duan Z., Cui W., Han J., Gu Y., Wu Z., Jing Z., Sun C., Peng W. Fiber-optic anemometer based on single-walled carbon nanotube coated tilted fiber Bragg grating. Optics Express, 2017, vol. 25, no. 20, pp. 24521–24530. doi: 10.1364/OE.25.024521
6. Liu Y., Liang B., Zhang X., Hu N., Li K., Baldini F., Gui X., Chiavaioli F., Guo T. Photothermal anemometer based on carbon nanotube-coated highly tilted fiber Bragg grating-assisted SPR sensor. Proceedings of SPIE, 2019, vol. 11199, pp. 1119918. doi: 10.1117/12.2540040
7. Wang J., Liu Z.-Y., Gao S., Zhang A.P., Shen Y.-H., Tam H.-Y. Fiber-optic anemometer based on Bragg grating inscribed in metal-filled microstructured optical fiber. Journal of Lightwave Technology, 2016, vol. 34, no. 21, pp. 4884–4889. doi: 10.1109/JLT.2016.2612299
8. Liu G., Hou W., Qiao W., Han M. Fast-response fiber-optic anemometer with temperature self-compensation. Optics Express, 2015, vol. 23, no. 10, pp. 13562–13570. doi: 10.1364/OE.23.013562
9. Cheng J., Zhu W., Huang Z., Hu P. Experimental and simulation study on thermal gas flowmeter based on fiber Bragg grating coated with silver film. Sensors & Actuators A: Physical, 2015, vol. 228, pp. 23–27. doi: 10.1016/j.sna.2015.02.033
10. Wang X., Dong X., Zhou Y., Li Y., Cheng J., Chen Z. Optical fiber anemometer using silver-coated fiber Bragg grating and bitaper. Sensors & Actuators A: Physical, 2014, vol. 214, pp. 230–233. doi: 10.1016/j.sna.2014.04.013
11. Novikova V.A., Varzhel S.V., Tokareva I.D., Dmitriev A.A. Liquid flow motion rate measuring method, based on the fiber Bragg gratings. Optical and Quantum Electronics, 2020, vol. 52, no. 3, pp. 132. doi: 10.1007/s11082-020-2257-2
12. Othonos A. Fiber Bragg gratings. Review of Scientific Instruments, 1997, vol. 68, no. 12, pp. 4309–4341. doi: 10.1063/1.1148392
13. Varzhel S., Kulikov A., Aseev V., Brunov V., Kal'ko V., Arteev V. single excimer laser pulse writing of narrow-band fiber Bragg reflectors by phase mask method. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2011, no. 5 (75), pp. 27–30. (in Russian)
14. Varzhel S.V., Kulikov A.V., Meshkovskii I.K., Strigalev V.E. Recording Bragg gratings in a birefringent optical fiber with a single 20-ns pulse of an excimer laser. Journal of Optical Technology, 2012, vol. 79, no. 4, pp. 257–259. doi: 10.1364/JOT.79.000257
15. Varzhel' S.V., Mun'ko A.S., Konnov K.A., Gribaev A.I., Kulikov A.V. Recording Bragg gratings in hydrogenated birefringent optical fiber with elliptical stress cladding. Journal of Optical Technology, 2016, vol. 83, no. 10, pp. 638–641. doi: 10.1364/JOT.83.000638
16. Varzhel S.V. Fiber Bragg Gratings. St. Petersburg, ITMO University Publ., 2015, 65 p. (in Russian)


Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright 2001-2024 ©
Scientific and Technical Journal
of Information Technologies, Mechanics and Optics.
All rights reserved.

Яндекс.Метрика