doi: 10.17586/2226-1494-2020-20-4-589-594


SELECTION OF COMPOSITE MATERIAL IN ELECTROMAGNETIC LOG SENSOR

A. S. Voronov, M. I. Evstifeev


Read the full article  ';
Article in Russian

For citation:
Voronov A.S., Evstifeev M.I. Selection of composite material in electromagnetic log sensor. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2020, vol. 20, no. 4, pp. 589–594 (in Russian). doi: 10.17586/2226-1494-2020-20-4-589-594


Abstract
Subject of Research. The paper considers the issues of choosing an insulating material for a deep-sea electromagnetic log sensor. The effect of the insulating material characteristics on the operational factors of the sensor is studied. Method. Matlab program was used to analyze the effect of design parameters on the instrumental error of the sensor. For this purpose a mathematical model of the instrumental error component was built, and its evaluation was carried out. The stress-strain state of the sensor was simulated by the finite element method in the ANSYS Workbench application package. Analysis of insulating material peeling from the case during shrinkage was carried out in the Static Structural module. Fill simulation was performed in the Fluid Flow module. All materials are taken to be isotropic at calculations. Main Results. The effect of the insulating material characteristics on the instrumental error of the electromagnetic log sensor is shown. The design and technological issues of the insulating material choice are described. Recommendations on the choice of design parameters are given to reduce peeling of the material and the occurrence of sensors emptiness formed by filling with composite material. The validity of the recommendations is confirmed by computer simulation and experiments. Practical Relevance. The results obtained can be applied in the modernization, design and construction of new electromagnetic log sensors.

Keywords: electromagnetic log sensor, composite material, instrumental error, computer simulation

References
1. Andreev S.I. Global ocean mineral resources: study and development prospects. Geology of the Seas and Oceans. Moscow, 2007, pp. 85–87. (in Russian)
2. Burilichev A.V. The future of mankind is inextricably linked with ocean study and exploration. Bezopasnost' Rossii, 2011, no. 5, pp. 40–43. (in Russian)
3. Filimonov A.K. Underwater robotics. Proc. of the International Scientific and Technical Conference “Extreme robotics”, 2011, pp. 43–49. (in Russian)
4. Sagalevich A. Methods of deep dives in whole ice cover conditions. Oceanology, 2016, vol. 56, no. 3, pp. 452–458. doi: 10.1134/S0001437016030176
5. Avanesov Y.L., Voronov A.S., Evstifeev M.I. Computer simulation of electromagnetic log sensor strength characteristics. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2016, vol. 16, no. 4, pp. 738–744. (in Russian). doi: 10.17586/2226-1494-2016-16-4-738-744
6. Avanesov Y.L., Bukanova A.N., Voronov A.S., Evstifeev M.I. Optimization of design parameters for depth electromagnetic speed sensor. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2018, vol. 18, no. 1, pp. 140–146. (in Russian). doi: 10.17586/2226-1494-2018-18-1-140-146
7. Avanesov Yu.L., Voronov A.S., Evstifeev M.I. Electromagnetic log deep-sea sensor design issues. Giroskopiya i Navigatsiya, 2018, vol. 26, no. 2(101), pp. 77–87. (in Russian). doi: 10.17285/0869-7035.2018.26.2.077-087
8. Saranchin A.I., Polkovnikov V.F., Zav'yalov V.V. Inductive Electronic Log IEL-2M. Vladivostok, 2003, 40 p. (in Russian)
9. Avanesov Yu.L., Evstifeev M.I., Voronov A.S. Estimating the instrumental error of electromagnetic log sensor in ultradeep water. Proc. of the International Workshop Navigation and Motion Control 2017, 2017, pp. 62–67.
10. Sivukhin D.V. General Physics Course. Vol. 3. Electricity. Moscow, Nauka Publ., 1996, 704 p. (in Russian)
11. Gumeniuk N.S., Grushin S.S. Application of composite materials in shipbuilding. Modern High Technologies, 2013, no. 8-1, pp. 116–117. (in Russian)
12. Pikul V.V. Glass-based composite nanomaterial creation. Perspektivnye Materialy, 2008, no. 3, pp. 78–81. (in Russian)
13. Bakhareva V.E., Sargsyan A.S. New heat-resistant electrical insulating fiberglass. Inorganic Materials: Applied Research, 2017, vol. 8, no. 6, pp. 881–885. doi: 10.1134/S2075113317060016
14. Ushkov S.S., Nikolaev G.I., Mikhailov V.I., Matveev G.V., Hesin Yu. D. Structural materials for deep-water submersibles. Sudostroenie, 2004, no. 5, pp. 111–114. (in Russian)
15. Yuresko T.A. Syntactic foams as heat insulation of habitable underwater vehicles. Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies, 2014, no. 2, pp. 21–26. (in Russian)
16. Zvyagintsev A.Yu. Study of marine fouling in the Institute of Marine Biology FEB RAS. Vestnik of Far Eastern Branch of Russian Academy of Sciences, 2007, no. 4, pp. 3–16. (in Russian)
17. Zaslavskii B.V. Strength of Materials Short Course. Moscow, Mashinostroenie Publ., 1986, 328 p. (in Russian)


Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright 2001-2024 ©
Scientific and Technical Journal
of Information Technologies, Mechanics and Optics.
All rights reserved.

Яндекс.Метрика