doi: 10.17586/2226-1494-2020-20-5-661-666


ROUGHNESS STUDY OF PAPER MADE FROM SECONDARY RAW MATERIALS BY ATOMIC FORCE MICROSCOPY

H. A. Babakhanova, Z. K. Galimova, M. M. Abnunazarov, I. I. Ismoilov


Read the full article  ';
Article in Russian

For citation:
Babakhanova H.A., Galimova Z.K., Abdunazarov M.M., Ismoilov I.I. Roughness study of paper made from secondary raw materials by atomic force microscopy. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2020, vol. 20, no. 5, pp. 661–666 (in Russian). doi: 10.17586/2226-1494-2020-20-5-661-666


Abstract
The paper considers the issues of high-precision parameter control of the produced paper products with secondary raw materials as a component. A method of atomic force microscopy is proposed for paper roughness study. Visualization of the obtained topographic images of each type of paper surface under study was performed with the use of a Solver HV scanning probe microscope; the average roughness of the height differences for each type of paper was determined. The results were compared with the state standard requirements and international recommendations. It is shown that applying of scanning probe microscopy makes it possible to carry out parameter express control of the cellulose paper products during their production. With the roughness express analysis by atomic force microscopy it might become possible to control purposefully the technological process and create the new types of paper products with specified properties that provide graphic printing accuracy without loss of small image details.

Keywords: paper structure, secondary raw materials, cellulose, roughness, atomic force microscopy, surface profile

References
1. Kirsankin A.A., Mikhaleva M.G., Politenkova G.G., Nikolskiy S.N., Stovbun S.V. Studying the topography of materials on cellulose basis using atomic force microscopy. Lesnoy vestnik / Forestry Bulletin, 2018, vol. 22, no. 1, pp. 84–93. (in Russian). doi: 10.18698/2542-1468-2018-1-88-93
2. Mikhaleva M.G., Vtiurina D.N., Nikolskii S.N., Stovbun S.V., Zholnerovich N.V., German N.A., Nikolaichik I.V. Atomic force microscopy as an advanced method for roughness determination of pulp and paper products. Materials of International Scientific and Technical Conference dedicated to the 100th anniversary of Professor
V.M. Reznikov’s birth: “Chemistry and chemical technology for  processing of plant raw materials”, Мinsk, October 10-12, 2018, pp. 126–130. (in Russian)
3. Product list of Lomond ink-jet printing materials. Available at: http:// printer.ucoz.ua/Lomond-2005.pdf (accessed: 06.07.2020). (in Russian)
4. Chinga G. Structural studies of LWC paper coating layers using SEM and image analysis techniques: Thesis submitted in partial fulfilment of the doktor ingeniør degree / Norwegian University of Science and Technology Department of Chemical Engineering. February 2002, 122 p. Available at: https://ntnuopen.ntnu.no/ntnu-xmlui/ handle/11250/248044 (accessed: 06.07.2020).
5. Yang D., Moran-Mirabal J.M., Parlange J., Walker L.P. Investigation of the porous structure of cellulosic substrates through confocal laser scanning microscopy. Biotechnology and Bioengineering, 2013, vol. 110, no. 11, pp. 2836–2845. doi: 10.1002/bit.24958
6. Breuninger S. White Paper: A high-quality Raman microscope can be recognized by these 5 criteria. Available at: https://www. researchgate.net/publication/329184103_White_Paper_A_high- quality_Raman_microscope_can_be_recognized_by_these_5_criteria (accessed: 06.07.2020).
7. Shimadzu — AFM Observation of Coated Paper and Printed Surface. Available at: http://www.shimadzu.com/an/surface/spm/data/appli/ paper.html (accessed: 06.07.2020).
8. Määttänen A., Fors D., Wang S., Valtakari D., Ihalainen P., Peltonen J. Paper-based planar reaction arrays for printed diagnostics. Sensors and Actuators, B: Chemical, 2011, vol. 160, no. 1, pp. 1404–1412. doi: 10.1016/j.snb.2011.09.086
9. Zhukov M.V. Structure control for different types of paper by atomic force microscopy. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2014, no. 1(89), pp. 44–49. (in Russian)
10. Kirsankin A.A., Mikhaleva M.G., Nikolskii S.N., Musohranova A.V., Stovbun S.V. Direct method of quality control surface coated types of paper. Chemistry of plant raw material, 2016, no. 4, pp. 157–161. (in Russian). doi: 10.14258/jcprm.2016041415
11. Mironov V.L. Scanning probe microscopy of solid-state nanostructures: dissertation for the degree of doctor of physics and mathematics. Nizhny Novgorod, 2009, 395 p. (in Russian)
12. Babadzhanova Z.Kh., Karomatov I.D., Zhumaev B.Z., Alymova D.K. Mulberry, sycamine: application in ancient, modern folk and scientific medicine (literature review). Young scientist, 2015, no. 7, pp. 256–266. (in Russian)
13. Rоzеn B.Ya. Wonderful world of paper. Moscow, Lesnaja promyshlennost’ Publ., 1986, 124 p. (in Russian)
14. Sаvеlеvа L.F. Healing plants around us. Vоlgоgrаd, Izdаtеl Publ., 2018, 376 p. (in Russian)
15. Sherysheva Yu.V., Sentyurova L.G., Kasimova N.B. The dye from the fruit of the mulberry tree. International Journal of Applied and Fundamental Research, 2018, no. 5-2, pp. 301–305. (in Russian)


Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright 2001-2024 ©
Scientific and Technical Journal
of Information Technologies, Mechanics and Optics.
All rights reserved.

Яндекс.Метрика