Menu
Publications
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
Editor-in-Chief
Nikiforov
Vladimir O.
D.Sc., Prof.
Partners
doi: 10.17586/2226-1494-2022-22-1-1-9
A study of a silicone film deposited on quartz glass under laser radiation
Read the full article ';
Article in Russian
For citation:
Abstract
For citation:
Belikov A.V., Klochkov I.S., Alekseev I.V., Kapralov S.A. A study of a silicone film deposited on quartz glass under laser radiation. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2022, vol. 22, no. 1, pp. 1–9 (in Russian). doi: 10.17586/2226-1494-2022-22-1-1-9
Abstract
The paper studies the structure, optical and operational properties of a silicone film deposited on the surface of quartz glass as a result of the action of laser radiation on volatile substances released from a silicone rubber sample in a closed volume. The research was carried out within the framework of the laser multiparameter method and using an original setup, which includes a solid-state neodymium laser with a wavelength of 1064 nm, and laser pulse parameters: energy of 105 mJ, a duration of 11–14 ns, a repetition rate of 10 Hz. A sealed test-cuvette is placed at the output of the laser. A silicone rubber sample is placed inside the test-cuvette. When laser radiation passes through the test-cuvette, volatile substances that are released from the sample over time interact with the laser radiation and create deposition zones on the optical elements of the test-cuvette, which affect the optical characteristics of these optical elements. The topology of the deposition zones was studied using a profilometer. The structural composition of the original silicone rubber and the deposition zone was determined using a scanning electron microscope. The main results show the dependences of the coefficients of the area and attenuation of the deposition zone on the temperature and the number of laser pulses. The elemental composition, color, resistance to the action of the solvent, and the thickness of the deposition zones have been investigated. It was found that with an increase in the temperature and the number of laser pulses, the area and attenuation coefficients of the deposition zones increase, the color does not change, and the resistance to the action of the solvent increases. With an increase in temperature, the deposition zone, initially consisting of micro-fragments, becomes continuous, and with an increase in the number of laser pulses, its thickness increases. The thickness of the deposition zone is unevenly distributed along its diameter. The results obtained can be applied in the development of silicone-containing biochips for health diagnostics and therapy.
Keywords: laser multiparameter method, sealed volume, test-cuvette, attenuation, deposition zone, silicone rubber
References
References
- Kamaly N., Yameen B., Wu J., Farokhzad O.C. Degradable controlled-release polymers and polymeric nanoparticles: mechanisms of controlling drug release. Chemical Reviews, 2016, vol. 116, no. 4, pp. 2602–2663. https://doi.org/10.1021/acs.chemrev.5b00346
- Barkalina N., Charalambous C., Jones C., Coward K. Nanotechnology in reproductive medicine: emerging applications of nanomaterials. Nanomedicine: Nanotechnology, Biology and Medicine, 2014, vol. 10, no. 5, pp. e921–e938. https://doi.org/10.1016/j.nano.2014.01.001
- Furth M.E., Atala A., Van Dyke M.E. Smart biomaterials design for tissue engineering and regenerative medicine. Biomaterials, 2007, vol. 28, no. 34, pp. 5068–5073. https://doi.org/10.1016/j.biomaterials.2007.07.042
- Gandhi A., Paul A., Sen S.O., Kumar K.S. Studies on thermoresponsive polymers: Phase behaviour, drug delivery and biomedical applications. Asian Journal of Pharmaceutical Sciences, 2015, vol. 10, no. 2, pp. 99–107. https://doi.org/10.1016/j.ajps.2014.08.010
- Suhardi V.J., Bichara D.A., Kwok S.J.J., Freiberg A.A., Rubash H., Malchau H., Yun S.H., Muratoglu O.K., Oral E. A fully functional drug-eluting joint implant. Nature Biomedical Engineering, 2017, vol. 1, no. 6, pp. 0080. https://doi.org/10.1038/s41551-017-0080
- Masood F. Polymeric nanoparticles for targeted drug delivery system for cancer therapy. Materials Science and Engineering: C, 2016, vol. 60, pp. 569–578. https://doi.org/10.1016/j.msec.2015.11.067
- Ulbrich K., Holá K., Šubr V., Bakandritsos A., Tuček J., Zbořil R. Targeted drug delivery with polymers and magnetic nanoparticles: covalent and noncovalent approaches, release control, and clinical studies. Chemical Reviews, 2016, vol. 116, no. 9, pp. 5338–5431. https://doi.org/10.1021/acs.chemrev.5b00589
- Soppimath K.S., Aminabhavi T.M., Kulkarni A.R., Rudzinski W.E. Biodegradable polymeric nanoparticles as drug delivery devices. Journal of Controlled Release, 2001, vol. 70, no. 1-2, pp. 1–20. https://doi.org/10.1016/S0168-3659(00)00339-4
- Mokhtarzadeh A., Alibakhshi A., Hejazi M., Omidi Y., Ezzati Nazhad Dolatabadi J. Bacterial-derived biopolymers: Advanced natural nanomaterials for drug delivery and tissue engineering. TrAC Trends in Analytical Chemistry, 2016, vol. 82, pp. 367–384. https://doi.org/10.1016/j.trac.2016.06.013
- Luo D., Gould D.J., Sukhorukov G.B. Local and sustained activity of doxycycline delivered with layer-by-layer microcapsules. Biomacromolecules, 2016, vol. 17, no. 4, pp. 1466–1476. https://doi.org/10.1021/acs.biomac.6b00070
- Wang C., Zhang G., Liu G., Hu J., Liu S. Photo-and thermo-responsive multicompartment hydrogels for synergistic delivery of gemcitabine and doxorubicin. Journal of Controlled Release, 2017, vol. 259, pp. 149–159. https://doi.org/10.1016/j.jconrel.2016.11.007
- Sukhorukov G.B., Donath E., Lichtenfeld H., Knippel E., Knippel M., Budde A., Möhwald H. Layer-by-layer self assembly of polyelectrolytes on colloidal particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 1998, vol. 137, no. 1-3, pp. 253–266. https://doi.org/10.1016/S0927-7757(98)00213-1
- Dhoot N.O., Wheatley M.A. Microencapsulated liposomes in controlled drug delivery: strategies to modulate drug release and eliminate the burst effect. Journal of Pharmaceutical Sciences, 2003, vol. 92, no. 3, pp. 679–689. https://doi.org/10.1002/jps.19104
- Gai M., Frueh J., Kudryavtseva V.L., Mao R., Kiryukhin M.V., Sukhorukov G.B. Patterned microstructure fabrication: polyelectrolyte complexes vs polyelectrolyte multilayers. Scientific Reports, 2016, vol. 6, pp. 37000. https://doi.org/10.1038/srep37000
- Gai M., Frueh J., Tao T., Petrov A.V., Shesterikov E.V., Tverdokhlebov S.I., Sukhorukov G.B. Polylactic acid nano- and microchamber arrays for encapsulation of small hydrophilic molecules featuring drug release via high intensity focused ultrasound. Nanoscale, 2017, vol. 9, no. 21, pp. 7063–7070. https://doi.org/10.1039/C7NR01841J
- Belikov A.V., Klochkov I.S., Alekseev I.V., Kapralov S.A. Laser multiparameter method for incoming inspection of the mounting elements used in the volume of sealed neodymium laser emitters. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2021, vol. 21, no. 2, pp. 154–162. (in Russian). https://doi.org/10.17586/2226-1494-2021-21-2-154-162
- Schneider C.W., Lippert T. Laser ablation and thin film deposition. Springer Series in Materials Science, 2010, vol. 139, pp. 89–112. https://doi.org/10.1007/978-3-642-13281-0_5
- Krebs H.-U., Weisheit M., Faupel J., Süske E., Scharf T., Fuhse C., Störmer M., Sturm K., Seibt M., Kijewski H., Nelke D., Panchenko E., Buback M. Pulsed laser deposition (PLD) - a versatile thin film technique. Advances in Solid State Physics, 2003, vol. 43, pp. 505–518. https://doi.org/10.1007/978-3-540-44838-9_36
- Dler A. Thin film deposition processes. International Journal of Modern Physics and Applications, 2015, vol. 1, no. 4, pp. 193–199.
- Wasa K., Kitabatake M., Adechi H. Thin Film Materials Technology: Sputtering of Compound Materials. Walliam Andrew Inc, 2004, pp. 1.
- Fominski V.Yu., Romanov R.I., Nevolin V.N., Gnedovets A.G. Features of metal oxide thin film formation in Pt/WOx/SiC gas sensor device by pulsed laser deposition. Perspektivnye materialy, 2011, no. 2, pp. 5–16. (in Russian)
- Kulinich S.A., Yamaki T., Miyazoe H., Yamamoto H., Terashima K. Effect of the substrate temperature and deposition rate on the initial growth of thin lithium niobate-tantalate films deposited from a thermal plasma. Physics of the Solid State, 2006, vol. 48, no. 5, pp. 904–911. https://doi.org/10.1134/S1063783406050155
- Tsaplin S.V., Bolychev S.A. Research of the dynamics of condensed product deposition. Vestnik of Samara University Aerospace and Mechanical Engineering, 2014, vol. 14, no. 3, pp. 109–121. (in Russian). https://doi.org/10.18287/1998-6629-2014-0-3(45)-109-121
- Pupan L.I. The study of material structure by electron microscopy: guidelines for laboratory research on the course "Introduction to nanotechnologies". Kharkiv, Kharkiv Polytechnic Institute, 2011, 35 p. (in Russian)