DOI: 10.17586/2226-1494-2018-18-2-205-211


E. A. Sycheva, V. V. Korotaev, I. S. Nekrylov, A. N. Timofeev, M. A. Kleshchenok, . Joel Jose Puga Coelho Rodrigues

Read the full article 
Article in Russian

For citation: Sycheva E.A., Korotaev V.V., Nekrylov I.S., Timofeev A.N., Kleshchenok М.А., Rodrigues Joel J. P. C. Choosing parameters of spatial position control optical-electronic systems with active reference marks. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2018, vol. 18, no. 2, pp. 205–211 (in Russian). doi: 10.17586/2226-1494-2018-18-2-205-211


Subject of Research.The paper considers parameters relations in active reference mark optical-electronic system of large-sized structures spatial position control in the presence of vertical temperature gradient. We describe the idea and operation principle of the dispersion method forthe vertical temperature gradient determination bycolor camera and RGB optical radiation source. The basic condition for choosing parameters of active reference mark optical-electronic system is derived from relations that define hardware realization of the system and parameters of the air tract, which are used in the dispersion method. Method. The principle of equal influence of error components on the totalerror is used. We admitted an assumption that optical radiation is propagating in the single "refractive block" and there is no fluctuations of the air tract refractive index in time and space.Main Results.The basic criterion is proposed for choosing parameters of active reference mark optical-electronic system for large-sized structuresspatial position control in thepresence of vertical temperature gradient. The efficiency of the dispersion method for minimization  of vertical temperature gradient influence is proved. The basic condition proposed gives the possibilityto estimate this efficiency and choose the hardware parameters.Practical Relevance.The results given in the paper can be used in design of active reference mark optical-electronic systems where the influence of the air tract is strong.

Keywords: optical-electronic system, air tract temperature gradient, dispersion method, non-excluded error component, active reference mark

  1. Vasilev A.S., Konyakhin I.A., Timofeev A.N., Lashmanov O.U., Molev F.V. Electrooptic converter to control linear displacements of the large structures of the buildings and facilities. ProceedingsofSPIE, 2015,vol. 9525. doi: 10.1117/12.2184528
  2. Korotaev V.V., Pantyushin A.V., Timofeev A.N. Optoelectronic systems for control of the reference markers position. Railway Track and Facilities, 2012, no. 11,
    pp. 34–37. (in Russian)
  3. Zhao X., Li X., Liang H., Deng F., Zhou L., Chen W. The detecting method of building deformation based on terrestrial laser point cloud. Proc. 12th Int. Conf. on Computational Intelligence and Security. Wuxi, Jiangsu, China, 2016, pp. 466–469. doi: 10.1109/CIS.2016.112
  4. Mikheev S.V., Konyakhin I.A., Barsukov O.A. Optical-electronic system for real-time structural health monitoring of roofs. Proceedings of SPIE, 2016, vol. 9896, art. 98961C. doi: 10.1117/12.2227862
  5. Prilepin M.T., Golubev A.N. Instrumental Methods of Geodesic Refractometry. Moscow, VINITI, 1979, 91 p. (in Russian)
  6. Zapryagaeva L.A., Sveshnikova I.S. Calculation and Design of Optical Systems. Moscow, MIIGAiK Publ., 2009, 176 p. (in Russian)
  7. Ingensand H., Boeckem B. A high-accuracy alignment system based on the dispersion effect. Proc. 5th Int. Workshop on Accelerator Alignment, IWAA97, 1997.
  8. Gryzulin S.I. Alignment of Optical Paths. Moscow, MAKS Press, 2011, 194 p. (in Russian)
  9. Optical Methods in Engineering Metrology. Ed. D.C. Williams. Springer, 2012, 477 p.
  10. Yakushenkov Yu.G. Fundamentals of Optoelectronic Instrumentation. Moscow, LogosPubl.,2013, 376 p. (in Russian)
  11. Dement'ev V.E. Modern Geodetic Engineering and its Application. Moscow, Akademicheskii Proekt Publ., 2008, 591 p. (in Russian)
  12. Neumyvakin Yu.K. Automation of Geodetic Measurements in Meliorative Land Development. Moscow, Nedra Publ., 1984, 128 p.
  13. Bogatinskii E.M., Korotaev V.V., Maraev A.A., Timofeev A.N. Research of ways of optical path influence decrease in distributed optical-electronic systems for prevention of anthropogenic disasters. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2010, no. 3, p. 130. (in Russian)
  14. Maraev A.A., Timofeev A.N., Yaryshev S.N. Study of multispectral selection method under cross-impacts in color videocamera channels. Journal of Instrument Engineering, 2012, vol. 55, no. 4, pp. 17–21. (in Russian)
  15. Latyev S.M. Construction of Precise (Optical) Devices. St. Petersburg, Politekhnika Publ., 2007, 579 p. (in Russian)
  16. Lashmanov O.Yu., Pantyushin A.V., Timofeev A.N., Yaryshev S.N. Application possibility analysis of multispectral method for air channel influence minimization in optical-electronic target attitude control systems. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2011, no. 3, pp. 5–9. (in Russian)
  17. Andreev A.L., Korotaev V.V., Pashkovsky D.M. Selection of small objects images against an inhomogeneous background under noise conditions. Journal of Instrument Engineering, 2013, vol. 56, no. 10, pp. 88–93. (in Russsian)
  18. Nekrylov I.S., Timofeev A.N., Kleshchenok M.A. The research of the possibility of the dispersion method sensitivity increase for the air tract vertical temperature gradient determination by analyzing the diffraction pattern. Proceedings of SPIE, 2017, vol. 10231, art. 1023115. doi: 10.1117/12.2266744

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright 2001-2018 ©
Scientific and Technical Journal
of Information Technologies, Mechanics and Optics.
All rights reserved.