doi: 10.17586/2226-1494-2019-19-2-347-358


PARAMETRIC IDENTIFICATION OF SHIP MODEL BY SYMMETRIC MOTIONS AROUND ROLL ANGLE WITH TAUTWIRE REFERENCE POSITION SENSOR

A. S. Alyshev, D. V. Romaev, V. G. Melnikov, A. M. Titov, A. E. Kovalenko


Read the full article  ';
Article in Russian

For citation:

Alyshev A.S., Romaev D.V., Melnikov V.G., Titov A.M., Kovalenko A.E. Parametric identification of ship model by symmetric motions around roll angle with tautwire reference position sensor. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2019, vol. 19, no. 2,  pp. 347–358 (in Russian). doi: 10.17586/2226-1494-2019-19-2-347-358



Abstract

The paper presents a new method of identifying the parameters of the ship model using symmetric motions. The subject of research is the improvement of the parameter identification accuracy under the condition of complete uncertainty of mathematical models of the ship hull and reaction wheel device, as well as the development of a new position reference sensor for ship models in the form of a tautwire inclinometer. Small symmetric reversing accelerating-decelerating program motions about roll angle were used, while the model of the vessel was fixed in the test basin and the movement in other degrees of freedom was excluded. To create the programmed motions, an electric motor with a flywheel mounted on the vessel was used. The control system has been developed as an application of a hybrid adaptive controller consisting of a consecutive compensator and a sliding controller, and their parameters are adjusted taking into account the restriction on their maximum values. A new approach involves carrying out two experiments. During the main experiment, the program motions of the model occur about the roll angle, while the additional experiment involves programmed motions of the flywheel around the flywheel rotation angle. The program trajectory of the flywheel was obtained according to the results of the main experiment. Illustrative results are given showing the essence of the proposed method and the results of the control system with harmonic oscillation as a reference trajectory. The operating principle of the cable inclinometer is considered, and a brief overview of the existing technical solutions is presented concerning the part of the structure for the desired cable tension support. Calculation formulas are given determining the position of a vessel with a dynamic positioning system in the case of measuring angles in the cable inclinometer using potentiometers or accelerometers. The results can be useful when carrying out model tests or for full-scale vessels with dynamic positioning systems.


Keywords: parametric identification, symmetric program motions, flywheel oscillator, adaptive control, consecutive compensator, sliding mode control, ship model, dynamic position, tautwire reference sensor, accelerometer

Acknowledgements. This work was supported by the RFBR grant No.16-08-00997. A.S. Alyshev expresses his gratitude to the employees of JSC Navis Engineering, especially to A.N. Miroshnikov, A.Y. Loginov, E.B. Ambrosovskaya, S.V. Gusev and A.V. Krylov.

References
  1. Alyshev A., Dudarenko N., Melnikov V. Parametric identification of reaction wheel pendulums with adaptive control. Cybernetics and Physics, 2018, vol. 7, pp. 57–65.
  2. Alyshev A.S. Parametric identification for ship hull forms by symmetric motions around a yaw angle. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2019, vol. 19, no. 1, pp. 144–154 (in Russian). doi: 10.17586/2226-1494-2019-19-1-144-154
  3. Alyshev A.S., Melnikov V.G. Identification method for vessel hull hydrodynamic added moment of inertia. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2017, vol. 17, no. 4, pp. 744–748 (in Russian). doi: 10.17586/2226-1494-2017-17-4-744-748
  4. Melnikov G.I., Dudarenko N.A., Melnikov V.G., Alyshev A.S. Parametric identification of inertial parameters. Applied Mathematical Sciences, 2015, vol. 9, no. 136, pp. 6757–6765. doi: 10.12988/ams.2015.59584
  5. Perez T., Blanke M. Ship roll motion control. Proc. 8th IFAC Conference on Control Applications in Marine Systems, The International Federation of Automatic Control, IFAC. Rostock, Germany, 2010, pp. 1–12.
  6. Bobtsov A.A., Nikolaev N.A. Output control of some nonlinear system with unknown parameters and nonlinearity. Automation and Remote Control, 2007, vol. 68, no. 6, pp. 1069–1074. doi: 10.1134/S0005117907060124
  7. Belyavskiy A.O., Tomashevich S.I. Passivity-based method for quadrotor control. Large-Scale Systems Control, 2016, no. 63, pp. 155–181. (in Russian)
  8. Vlasov S.M., Borisov O.I., Gromov V.S., Pyrkin A.A., Bobtsov A.A. Robust system of dynamic positioning for robotized model of surface craft. Journal of Instrument Engineering, 2015, vol. 58, no. 9, pp. 713–719. (in Russian)
  9. Faronov M.V., Pyrkin A.A., Furtat I.B., Kolyubin S.A., Surov M.O., Vedyakov A.A. Robust control of mobile robots with the use of technical vision. Journal of Instrument Engineering, 2012, vol. 55, no. 12, pp. 63–65. (in Russian)
  10. Phillips D., Haycock B. Taut wire. Proc. Dynamic Positioning Conference, 2014.
  11. At Sea, 1944. The Taut Wire Machine on the Quarter Deck of the hydrographic survey vessel HMAS. Available at: www.awm.gov.au/collection/P02305.023 (accessed: 21.12.2018).
  12. Barabanov A.E., Romaev D.V., Miroshnikov A.N. Nonlinear filtering by scenario selection for radar tracking and dynamic ship positioning Proc. XII Vserossiiskoe Soveshchanie po Problemam Upravleniya, VSPU-2014. Moscow, 2014. (in Russian)
  13. Wen P., Stapleton C., Li Y. Tension control of a winding machine for rectangular coils control, Automation, Robotics and Vision. Proc. 10th Int. Conf. on Control, Automation, Robotics and Vision, 2008. doi: 10.1109/ICARCV.2008.4795843
  14. Liu Z., Ni F., Miedema S.A. Optimized design method for TSHD’s swell compensator, basing on modelling and simulation. Proc. Int. Conf. on Industrial Mechatronics and Automation. Chengdu, China, 2009, pp. 48–52.
  15. Aamo O.M., Fossen T.I. Controlling line tension in thruster assisted mooring systems. Proc. IEEE Int. Conf. on Control Applications. Hawaii, 1999. doi: 10.1109/cca.1999.801126
  16. Stephens R.I. Fibre Optic Taut Wire. Patent US 20150116697, 2015.
  17. DP Systems. Available at: www.marineengineering.org.uk/ page90.html (accessed: 21.12.2018).
  18. Faÿ H. Dynamic Positioning Systems: Principles, Design and Applications. Technip, 1990, 189 p.


Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright 2001-2024 ©
Scientific and Technical Journal
of Information Technologies, Mechanics and Optics.
All rights reserved.

Яндекс.Метрика