Nikiforov
Vladimir O.
D.Sc., Prof.
doi: 10.17586/2226-1494-2019-19-5-883-891
TECHNIQUES FOR VIBRATION RESISTANCE INCREASE OF QUARTZ PENDULUM ACCELEROMETER USING DIGITAL FEEDBACK AMPLIFIER
Read the full article ';
For citation:
Nikolaenko A.Yu., Skorobogatov V.V. Techniques for vibration resistance increase of quartz pendulum accelerometer using digital feedback amplifier. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2019, vol. 19, no. 5, pp. 883–891 (in Russian). doi: 10.17586/2226-1494-2019-19-5-883-891
Abstract
Subject of Research. The paper considers approaches of vibration resistance increasing for quartz pendulum accelerometer with digital feedback amplifier and without further development of measuring element design or application of damping measures. Method. The proposed methods are implemented algorithmically by means of the control program of the digital amplifier controller and are based on the extension of the device bandwidth, the correction of the regulating coefficients during the accelerometer operation, and the introduction of an additional control channel to the feedback loop. Main Results. The proposed methods were studied experimentally on a prototype quartz pendulum accelerometer with a digital feedback amplifier and a measuring range of ±50 g. The studies were carried out under the effects of vibration actions: broadband random vibration in the frequency range from 20 to 2000 Hz, (RMS deviation of the vibration acceleration amplitude of 8 g) and sinusoidal vibration in the frequency range from 20 to 2000 Hz (vibration acceleration amplitude of 10 g) along the sensitivity axis. The efficiency of the methods was estimated by the value of device vibration error — the difference between the averaged value of the device readings before vibration and the averaged value of the readings during the period of vibration. It was experimentally established that the best solution is to combine a wide bandwidth of the device with an additional control channel in the feedback loop, that reduces the accelerometer vibration error by an order of magnitude. Practical Relevance. The proposed methods increase the vibration resistance of a quartz pendulum accelerometer by applying original algorithms in the digital amplifier controller program, that makes it possible to put to use such accelerometers in objects susceptible to vibration while eliminating the need to introduce physical design modifications or additional damping measures.
References
2. Branets V.N., Dibrov D.N., Rizhkov V.C., Kalihman L.Ya., Kalihman D.M., Kaldimov N.A., Polushkin A.V., Nahov S.F. Measuring instrument of apparent linear acceleration vector — BILU KX 69-042 device for control systemof Soyuz-TMA spacecraft capsule. Proc. 13th Saint Petersburg International Conference on Integrated Navigation Systems (ICINS 2006), 2006, pp. 272–280.
3. Konovalov S.F., Polynkov A.V., Trunov A.A., Seo J.B., Moon H.K. Research of operability of accelerometers at high linear acceleration, vibrating and shock effects without using test centrifuges, vibration and shock test tables. Proc. 14th Saint Petersburg International Conference on Integrated Navigation Systems (ICINS 2007), 2007, pp. 125–122.
4. Lunts J.L. Errors of gyroscopic devices. Leningrad, Sudostroenie, 1968, 232 p. (in Russian)
5. Konovalov S.F. Theory of vibration resistance of accelerometers. Moscow, Mashinostroenie, 1991, 269 p. (in Russian)
6. Skorobogatov V.V., Grebennikov V.I., Kalihman L.Ya., Kalihman D.M., Nakhov S.F., Ermakov R.V. The results of experimental testing of a thermally invariant quartz pendulum accelerometer with digital feedback and reprogrammable measurement range. Proc. 23rd Saint Petersburg International Conference on Integrated Navigation Systems (ICINS 2016), 2016, pp. 157–172.
7. Skorobogatov V.V. Problems of development of a wide range quartz pendulum accelerometer wath digital feedback and methods of solution. Izvestiya Tula State University, 2016, no. 10, pp. 17–298. Kalikhman D.M., Kalikhman L.Y., Nakhov S.F., Pozdnyakov V.M., Grebennikov V.I., Skorobogatov V.V., Deputatova E.A. Problems of development of modern units of electromechanical angular rate meters and quartz pendulum accelerometers for rocket and space industry. History and prospects. Izvestiya Tula State University, 2016, no. 10, pp. 311–325. (in Russian)
9. Grebennikov V.I., Kalikhman L.Ya., Kalikhman D.M., Nakhov S.F., Skorobogatov V.V., Sapozhnikov A.I., Smirnov E.S. Vibrostability of the quartz pendulum accelerometer with digital feedback. Proc. 22nd Saint Petersburg International Conference on Integrated Navigation Systems (ICINS 2015), 2015, pp. 405– 412.
10. Grebennikov V.I., Kalikhman D.M., Kalikhman L.Ya., Nakhov S.F., Nikolaenko A.Yu., Skorobogatov V.V. Method to Increase Stability of the Scale Factor of a Precision Pendulum Accelerometer with Digital Feedback. Proc. of 25th Saint Petersburg International Conference on Integrated Navigation Systems, St. Petersburg (ICINS 2018), 2018, pp. 457–459. doi: 10.23919/ICINS.2018.8405928
11. Novozhilov O.P. Basics on microprocessor technology. In 2 books. Moscow, RadioSoft, 2014, Book 1, 431 p. (in Russian)
12. Novozhilov O.P. Basics on microprocessor technology. In 2 books. Moscow, RadioSoft, 2014, Book 2, 333 p. (in Russian)
13. Besekersky V.A., Popov E.P. Theory of automatic control systems. Moscow, Nauka, 1975, 768 p. (in Russian)
14. Alexandrov A.G. Methods for constructing automatic control systems. Moscow, Fizmatlit, 230 p. (in Russian)
15. Berends D.A., Kukuliev R.M., Filippov K.K. Devices and automatic control systems with pulse-width modulation. Leningrad, Mashinostroenie, 1982, 280 p. (in Russian)
16. Stepanov O.A. Basics on the theory of assessment with ap- plications to the tasks of processing navigation information. Part 2. Introduction to the theory of filtration. St. Petersburg, State Research Center of the Russian Federation Concern CSRI Elektropribor, JSC, 2017, 428 p. (in Russian)