doi: 10.17586/2226-1494-2020-20-2-177-184


PULSED LASER DEPOSITION OF ALUMINUM NITRIDE THIN FILMS ONTO SAPPHIRE SUBSTRATES

O. V. Devitsky, D. A. Nikulin, I. A. Sysoev


Read the full article  ';
Article in Russian

For citation:
Devitsky O.V., Nikulin D.A., Sysoev I.A. Pulsed laser deposition of aluminum nitride thin films onto sapphire substrates. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2020, vol. 20, no. 2, pp. 177–184 (in Russian). doi: 10.17586/2226-1494-2020-20-2-177-184


Abstract

Subject of Research. The paper presents experimental study results of surface morphology and structural and optical properties of sapphire AlN films obtained by pulsed laser spraying. Method. Thin AlN films on sapphire were used as experimental samples. The preparation of AlN films was carried out using a combined installation of ion-beam and pulsed laser radiation. The deposition process was performed by sputtering a rotating aluminum target with 532 nm wavelength AYG: Nd3+ laser in the atmosphere of very pure nitrogen at the pressure of 3 and 4 Pa. The energy density of the laser pulse was 4 J/cm2 with a pulse duration of 15 ns and a pulse repetition rate of 15 Hz. The distance from the target surface to the sapphire substrate was 50 mm; the substrate temperature was 600 °C. Main Results. Using scanning electron microscopy and energy dispersive analysis, it was found that AlN films obtained at the nitrogen pressure in a vacuum chamber of 4 Pa have a composition more related to stoichiometric than AlN films obtained at the nitrogen pressure in a vacuum chamber of 3 Pa. The optical spectroscopy was used to study the transmission spectra of the samples under research. It was determined that the maximum transmission coefficient values of AlN films obtained at the nitrogen pressure in the vacuum chamber of 3 Pa (95.12 %) and 4 Pa (97.65 %) are within the wavelength range of 400–410 nm. The transmittance in the studied wavelength range of 300–1100 μm is at least 87 %, which characterizes the obtained film samples as optically transparent. Practical Relevance. The studied thin AlN films can be used as a buffer layer in optoelectronic devices, including the case of creating light-emitting diodes based on GaN and AlxGa1–xN of short-wave visible light and white-emitting devices.


Keywords: pulsed laser spraying, thin films, AlN, sapphire, optical properties

Acknowledgements. The publication was prepared as a part of the 2020-year state task “Development and creation of semiconductor heterointerfaces based on multicomponent materials for microwave electronics and photonics devices” (state registration number AAAA-A19-119040390081-2).

References
  1. Li H., Lu X., Li X., Zhang J., Hao Y. High quality transferable AlN thin film by PLD. Journal of Physics: Conference Series, 2017, vol. 864, pp. 012011. doi: 10.1088/1742-6596/864/1/012011
  2. Grandusky J.R., Randive R.V., Jordan T.C., Schowalter L.J. Fabrication of high performance UVC LEDs on aluminum-nitride semiconductor substrates and theirpotential application in point-of-use water disinfection systems. Springer Series in Materials Science, 2016, vol. 227, pp. 171–192. doi: 10.1007/978-3-319-24100-5_7
  3. Akasaki I., Amano H. Organometallic vapor-phase epitaxy of gallium nitride for high-brightness blue light-emitting diodes. Semiconductors and Semimetals, 1997, vol. 48, pp. 357–390. doi: 10.1016/S0080-8784(08)62408-4
  4. Dallaeva D., Ţălu Ş., Stach S., Škarvada P., Tománek P., Grmela L. AFM imaging and fractal analysis of surface roughness of AlN epilayers on sapphire substrates. Applied Surface Science, 2014, vol. 312, pp. 81–86. doi: 10.1016/j.apsusc.2014.05.086
  5. Qin M.L., Du X., Li Z., Humail I.S., Qu X. Synthesis of aluminum nitride powder by carbothermal reduction of a combustion synthesis precursor. Materials Research Bulletin, 2008, vol. 43, no. 11, pp. 2954‒2960. doi: 10.1016/j.materresbull.2007.12.008
  6. Belyanin A.F., Bouilov L.L., Zhirnov V.V., Kamenev A.I., Kovalskij K.A., Spitsyn B.V. Application of aluminum nitride films for electronic devices. Diamond and Related Materials, 1999, vol. 8, no. 2‒5, pp. 369‒372. doi: 10.1016/S0925-9635(98)00412-9
  7. Kroke E., Loeffler L., Lange F.F., Riedel R. Aluminum nitride prepared by nitridation of aluminum oxide precursors. Journal of the American Ceramic Society, 2002, vol. 85, no. 12, pp. 3117‒3119. doi: 10.1111/j.1151-2916.2002.tb00595.x
  8. Natesan K., Reed C.B., Rink D.L., Haglund R.C. Development and performance of aluminum nitride insulating coatings for application in a lithium environment. Journal of Nuclear Materials, 1998, vol. 258-263, part. 1, pp. 488‒494. doi: 10.1016/S0022-3115(98)00370-5
  9. Kim J., Pyeon J., Jeon M., Nam O. Growth and characterization of high quality AlN using combined structure of low temperature buffer and superlattices for applications in the deep ultraviolet. Japanese Journal of Applied Physics, 2015, vol. 54, no. 8, pp. 081001. doi: 10.7567/JJAP.54.081001
  10. Sun C.J., Kung P., Saxler A., Ohsato H., Haritos K., Razeghi M. A crystallographic model of (00·1) aluminum nitride epitaxial thin film growth on (00·1) sapphire substrate. Journal of Applied Physics, 1994, vol. 75, no. 8, pp. 3964–3967. doi: 10.1063/1.356017
  11. Lunin L.S., Devitskii O.V., Sysoev I.A., Pashchenko A.S., Kas’yanov I.V., Nikulin D.A., Irha V.A. Ion-beam deposition of thin AlN films on Al2O3 substrate. Technical Physics Letters, 2019, vol. 45, no. 12, pp. 1237–1240. doi: 10.1134/S106378501912023X
  12. Vispute R.D., Wu H., Narayan J. High quality epitaxial aluminum nitride layers on sapphire by pulsed laser deposition. Applied Physics Letters, 1995, vol. 67, no. 11, pp. 1549–1551. doi: 10.1063/1.114489
  13. Pantha B.N., Li J., Lin J.-Y., Jiang H.X. Single phase InxGa1−xN (0.25 ≤ x ≤ 0.63) alloys synthesized by metal organic chemical vapor deposition. Applied Physics Letters, 2008, vol. 93, no. 18, pp. 182107. doi: 10.1063/1.3006432
  14. Wang W., Yang W., Liu Z., Wang H., Wen L., Li G. Interfacial reaction control and its mechanism of AlN epitaxial films grown on Si(111) substrates by pulsed laser deposition. Scientific Reports, 2015, vol. 5, pp. 11480. doi: 10.1038/srep11480
  15. Lunin L.S., Lunina M.L., Devitsky O.V., Sysoev I.A. Pulsed laser deposition of AlxGa1–xAs and GaP thin films onto Si substrates for photoelectric converters. Semiconductors, 2017, vol. 51, no. 3, pp. 387–391. doi: 10.1134/S1063782617030174
  16. Chale-Laraa F., Zapata-Torres M., Caballero-Briones F., De la Cruz W., Cruz Gonz´alez N., Huerta-Escamilla C., Far´ıas M.H. Deposit of AlN thin films by nitrogen reactive pulsed laser ablation using an Al target. Revista Mexicana de F´ısica, 2019, vol. 65, no. 4, pp. 345–350. doi: 10.31349/RevMexFis.65.345
  17. Devitsky O.V., Kasyanov I.V., Sysoev I.A. Combined installation of ion-beam and pulsed laser radiation for generation of solar cells from thin GaP and GaAs films on Si. Proc. Nanostructured materials and converting devices for solar energy: VI All-Russian Scientific Conference. (October 19-20, 2018, Cheboksary). Cheboksary, 2018, pp. 120–123. (in Russian)
  18. Devitsky O.V., Dmitrieva O.G., Nikulin D.A., Kasyanov I.V., Sysoev I.A. Study of leukosapphire surface morphology change by argon ion beam at small grazing angle. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2019, vol. 19, no. 5, pp. 848–854. (in Russian). doi: 10.17586/2226-1494-2019-19-5-848-854
  19. Devitsky O.V., Nikulin D.A., Sysoev I.A., Osipyan V.B. Morphology and optical properties of AlN films on sapphire. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2019, vol. 19, no. 6, pp. 1049–1057. (in Russian). doi: 10.17586/2226-1494-2019-19-6-1049-1057


Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright 2001-2024 ©
Scientific and Technical Journal
of Information Technologies, Mechanics and Optics.
All rights reserved.

Яндекс.Метрика