doi: 10.17586/2226-1494-2021-21-3-326-333


A method for analysing the color rendering of digital cameras. Scientific and Technical Journal of Information Technologies, Mechanics and Optics

V. L. Zhbanova, I. L. Zhbanov


Read the full article  ';
Article in Russian

For citation:
Zhbanova V.L., Zhbanov I.L. A method for analysing the color rendering of digital cameras. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2021, vol. 21, no. 3, pp. 326–333 (in Russian).
doi: 10.17586/2226-1494-2021-21-3-326-333


Abstract
The paper proposes a method for studying the color rendition of digital cameras. This parameter is conventionally assessed visually by color targets in photography and design. The proposed method compares the chromaticity values of standard test objects with their measured values on a digital camera using special setup features. The setup includes a light source, a collimator for uniform illumination of a reflecting screen with a test object, and a research object, i.e., a digital camera. The camera is positioned at a 45 degree angle to the screen. This setup follows the recommendations of the Commission Internationale de l’Eclairage (CIE) for color measurements. To measure the colorimetric characteristics of the samples, the authors adopted the 0/45 illumination / observation scheme. The test object is illuminated with a light beam, the axis of which makes an angle not exceeding 10° from the normal to the sample surface. The sample is observed at an angle of 45° ± 5° from to the normal. The angle between the axis of the illuminating beam and any of its rays does not exceed 5°. A type A source (color temperature 2856 K) acts as an illuminator. Standardized reference sets of colored optical glasses (light filters) characterized by known chromaticity coordinates were chosen as test objects. To evaluate the results, specialized software has been developed that allows one to select individual pixels, calculate their brightness in order to find the chromaticity coordinates and compare the results with reference values. The method was tested using the Canon EOS 60D digital camera. At the time of measurement, digital filters for correction, anti-aliasing, sharpening, as well as color adjustment were turned off in the camera. The paper presents colorimetric measurements using 58 colored optical glasses. The averaged values fall into seven groups. The selected color space for measurements is sRGB. The measurement results proved the possibility of using the proposed technique for analysing and choosing appropriate digital recording devices for colorimetric measurements in such areas as medicine, chemistry and food industry.

Keywords: digital camera, color rendering, RGB, color difference, color space, light filters, experimental setup, method, technique

References
1.     Domasev M.V., Gnatiuk S.P. Color, Color Management, Color Calculations and Measurements. St. Petersburg, Piter Publ., 2009, 224 p. (in Russian)
2.      Popov S.A. Statistical method for calibrating digital photocameras to improve color reproduction. Avtometriya, 2003, vol. 39, no. 2, pp. 92–99. (in Russian)
3.      Sukhikh M.Iu. Digital camera calibration with Adobe Camera Raw and semi-automatic color coverage. Magazine Vestnik MGUP by Ivan Fedorov, 2012, no. 1, pp. 177–183. (in Russian)
4.      Kurečić M.S., Agić D., Mandić L. Developing a custom colour target for artwork imaging. Imaging Science Journal, 2011, vol. 59, no. 6, pp. 317–331. doi: 10.1179/136821910X12867873897319
5.      Xin H.J., Liu Y. Influence analysis of color input target to the scanner color characteristic. Applied Mechanics and Materials, 2013, vol. 262, pp. 123–126. doi: 10.4028/www.scientific.net/AMM.262.123
6.      Palacios-Ortega N., Velásquez Prieto D. Evaluation between methods for the color measurement in holograms by using a CMOS-RGB camera and a spectrometer. Proceedings of SPIE, 2013, vol. 8785, pp. 878568. doi: 10.1117/12.2027569
7.      Tschumperlé D., Porquet C., Mahboubi A. 3D Color CLUT compression by multi-scale anisotropic diffusion. Lecture Notes in Computer Science, 2019, vol. 11679, pp. 3–14. doi: 10.1007/978-3-030-29891-3_1
8.      Andriychuk V.A., Osadtsa Ya.M. Using cameras with optical converter arrays in photometry. Journal of Optical Technology, 2012, vol. 79, no. 2, pp. 88–91. doi: 10.1364/JOT.79.000088
9.      Lakota L.V., Mashkovtseva N.V., Shigabuddinova G.I., Muhamedzyanova G.Z. The usage of cell phave camera technologies in a clinical diagnostic laboratory. Kazan Medical Journal, 2009, vol. 90, no. 2, pp. 131–134. (in Russian)
10.   Konnik M.V., Manykin E.A., Starikov S.N. Extension of the possibilities of a commercial digital camera in detecting spatial intensity distribution of laser radiation. Quantum Electronics, 2010, vol. 40, no. 4, pp. 314–320. doi: 10.1070/QE2010v040n04ABEH014202
11.   Mousavi S.M.H., Lyashenko V., Prasath V.B.S. Analysis of a robust edge detection system in different color spaces using color and depth images. Computer Optics, 2019, vol. 43, no. 4, pp. 632–646. doi: 10.18287/2412-6179-2019-43-4-632-646
12.   Liang J.X., Wan X., Liu Q., Li C., Li J. Research on filter selection method for broadband spectral imaging system based on ancient murals. Color Research and Application, 2016, vol. 41, no. 6, pp. 585–595. doi: 10.1002/col.22004
13.   Judd D.B., Wyszecki G. Color in Business, Science and Industry. John Wiley & Sons, 1975, 553 p.
14.   Krivosheev M.I., Kustarev A.K. Color Measurements. Moscow, Jenergoatomizdat Publ., 1990, 240 p. (in Russian)
15.   Meshkov V.V., Matveev A.B. Foundations of Illumination Engineering. Part. 2. Tutorial.  Moscow, Gosjenergoatomizdat Publ., 1961, 416 p. (in Russian)
16.   Zhbanova V.L. The use of mathematical packages when researching colorimetry. Proc. 4th International Conference on Information Technologies in Engineering Education (Inforino), 2018, pp. 8581794. doi: 10.1109/INFORINO.2018.8581794
17.   Zhbanova V.L., Parvuyusov Y.B. Experimental investigation of the color-separation system of a photodetector array. Journal of Optical Technology, 2019, vol. 86, no. 3, pp. 177–182. doi: 10.1364/JOT.86.000177


Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright 2001-2024 ©
Scientific and Technical Journal
of Information Technologies, Mechanics and Optics.
All rights reserved.

Яндекс.Метрика