PERFORMANCE OPTIMIZATION OF THE DIODE-PUMPED SOLID-STATE LASER FOR SPACE APPLICATIONS

Arkhipov Denis A., Venglyk Valeriy I, Derevyanko Valeriy A., Egorov Maksim Sergeevich, Rezunkov Yuri A., Stepanov Vladimir V.

2015 , VOLUME 15, NUMBER 6 ( November-December )

ISSN 2226-1494 (print), ISSN 2500-0373 (online)

Publications

Editor-in-Chief

Nikiforov
Vladimir O.
D.Sc., Prof.

Partners

doi: 10.17586/2226-1494-2015-15-6-1000-1007

PERFORMANCE OPTIMIZATION OF THE DIODE-PUMPED SOLID-STATE LASER FOR SPACE APPLICATIONS

D. A. Arkhipov, V. I. Venglyk, V. A. Derevyanko, M. S. Egorov, Y. A. Rezunkov, V. V. Stepanov

Read the full article

Article in Russian

For citation: Arkhipov D.A., Venglyuk V.I., Derevyanko V.A., Egorov M.S., Rezunkov Yu.A., Stepanov V.V. Performance optimization of the diode-pumped solid-state laser for space applications. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2015, vol. 15, no. 6, pp. 1000–-1007.

Abstract

Subject of Research. Thermophysical and optical techniques of parameter regulation for diode pumped solid-state laser are studied as applied to space laser communication and laser ranging lines. Methods. The investigations are carried out on the base of the original design of diode pumped solid-state laser module that includes the following: Nd:YAG slab element, diode pumped by 400W QCW produced by NORTHROP GRUMMAN; two-pass unstable resonator with rotation of the laser beam aperture about its axis through 1800; the output mirror of the resonator with a variable reflection coefficient; hyperthermal conductive plates for thermal stabilization of the laser diode generation modes. The presence of thermal conductive plates excludes conventional running water systems applied as cooling systems for solid-state laser components. The diodes

temperature stabilization is achieved by applying the algorithm of pulse-width modulation of power of auxiliary electric heaters. To compensate for non-stationary thermal distortions of the slab refractive index, the laser resonator scheme comprises a prism reflector with an apex angle of 1200. Narrow sides of the prism are covered with reflective coating, and its wide side is sprayed with antireflection coating. The beam aperture is turned around its axis through 1800 because of triple reflection of the beam inside the prism. The turning procedure leads to compensating for the output beam phase distortions in view of symmetric character of the aberrations of slab refractive index. To suppress parasitic oscillations inside the slab, dielectric coatings of wide sides of the slab are used. Main Results. We have demonstrated theoretically and experimentally that the usage of hyperthermal conductive plates together with the algorithm of pulse-width modulation provides stabilizing of the diode substrate temperature accurate within ± 0.1 °С and smoothing the temperature distribution along the plate surface accurate within 1 °С. Optical schematic diagram of the laser resonator keeps the laser beam divergence not exceeding a diffraction limit more than twice under a light pump power of 100 W. We have also shown that to increase the lasing efficiency, slab multilayer dielectric coatings made of SiO2 и ZrO2 should be used. Practical Relevance. We have proposed original design of the diode pumped solid-state laser module optimizing the generation and pump modes of solid-state lasers by the temperature stabilization technique for laser diode array and by compensation of the slab aberrations. The techniques are also applicable under space conditions; that is an important factor at developing the space-based lasers.

Keywords: solid-state laser, diode pumping, slab, unstable resonator, hyperthermoconductive plate, parasitic oscillation.

Acknowledgements. We ought to thank Prof. L.A. Gubanova from ITMO University (Saint Petersburg) for useful discussions on the paper subject and for recommendations on optical coating of the laser slab.

References

1. Lebed'ko E.G. Sistemy Opticheskoi Lokatsii: Uchebnoe Posobie [Systems of Optical Ranging. Textbook]. Part 2. St. Petersburg, NIU ITMO Publ., 2012, 129 p.
2. Kravtsov N.V. Basic trends in the development of diode-pumped solid-state lasers. Quantum Electronics, 2001, vol. 31, no. 8, pp. 661–677. doi: 10.1070/QE2001v031n08ABEH002025
3. Grechin S.G., Nikolaev P.P. Diode-side-pumped laser heads for solid-state lasers. Quantum Electronics, 2009, vol. 39, no. 1, pp. 1–17. doi: 10.1070/QE2009v039n01ABEH013787
4. Polyakov V.M., Pokrovskii V.P., Soms L.N. Laser transmission module with a switchable directional pattern for the rangefinder of the Phobos-Ground spacecraft. Journal of Optical Technology (A Translation of Opticheskii Zhurnal), 2011, vol. 78, no. 10, pp. 640¬–643. doi: 10.1364/JOT.78.000640
5. Yang X., Bo Y., Peng Q., Zhang H., Geng A., Cui Q., Sun Z., Cui D., Xu Z. High-beam-quality, 5.1 J, 108 Hz diode-pumped Nd:YAG rod oscillator-amplifier laser system. Optics Communication, 2006, vol. 266, pp. 39–43. doi: 10.1016/j.optcom.2006.04.078
6. Glukhikh I.V., Kurunov R.F., Polikarpov S.S., Frolov S.V., Dimakov S.A. Powerful solid-state transversely diode-pumped YAG: Nd lasers with improved radiation quality. Technical Physics. The Russian Journal of Applied Physics, 2011, vol. 56, no. 8, pp. 1129–1134. doi: 10.1134/S1063784211080111
7. Coyle D.B., Kay R.B., Stysley P.R., Poulios D. Efficient, reliable, long-lifetime, diode-pumped Nd:YAG laser for space-based vegetation topographical altimetry. Applied Optics, 2004, vol. 43, no. 27, pp. 5236–5242. doi: 10.1364/AO.43.005236
8. Coyle D.B., Kay R.B., Stysley P.R., Poulios D. High output maximum efficiency prototype diode pumped laser for space application. Proc. Earth-Sun System Technology Conference, 2005, 5 p.
9. Stysley P., Coyle B., Kay R., Frederickson R., Poulios D., Blair B., Scott S. Arnold E. Lifetest of the high output maximum efficiency resonator (HOMER) laser for the SAFFIRE instrument on NASA’s DESDynI project. Proc. Conf. on Lasers and Electro-Optics: Laser Science to Photonic Applications, CLEO 2011. Baltimore, USA, 2011, art. 5951187.
10. Armandillo E., Norrie C., Cosentino A., Laporta P., Wazen P., Maine P. Diode-pumped high-brightness
Q-switched Nd:YAG laser. Optics Letters, 1997, vol. 22, no. 15, pp. 1168–1170. doi: 10.1364/OL.22.001168
11. Krebs D.J., Novo-Gradac A.-M., Li S.X., Lindauer S.J., Afzal R.S., Yu A.W. Compact, passively Q-switched Nd:YAG laser for the MESSENGER mission to Mercury. Applied Optics, 2005, vol. 44, no. 9, pp. 1715–1718. doi: 10.1364/AO.44.001715
12. Abshire J.B., Smith J.C., Schutz B.E. The Geoscience Laser Altimeter System (GLAS). Proc. 19th International Laser Radar Conference. Annapolis, USA, 1998, pp. 211–214.
13. Kracht D., Hahn, S., Huß R., Neumann J., Wilhelm R., Frede M., Peuser P. High efficiency, passively
Q-switched Nd:YAG MOPA for spaceborne laser altimetry. Proceedings of SPIE, 2006, vol. 6100, art. 610021. doi: 10.1117/12.674044
14. Ma X., Bi J., Hou X., Chen W. High efficiency diode-pumped slab oscillator and amplifier for space-based application. Optics and Laser Technology, 2011, vol. 43, no. 3, pp. 559–562. doi: 10.1016/j.optlastec.2010.07.016
15. Vasilyev E.N., Derevyanko V.A., Nesterov D.A., Kosenko V.E., Chebotarev V.E. Computational modeling of heat exchange in thermoregulation systems of a space vehicle. Computational Technologies, 2009, vol. 14, no. 6, pp. 19–28. (In Russian)
16. Biryuk V.V., Kitaev A.I. Head-pipes application for cooling of communications-electronics equipment. Vestnik SSAU, 2009, no. 3, pp. 342–345.
17. Belanger P.-A., Pare C. Unstable laser resonators with a specified output profile by using a graded-reflectivity mirror: geometrical optics limit. Optics Communications, 1994, vol. 109, no. 5–6, pp. 507–517. doi: 10.1016/0030-4018(94)90507-X
18. Rutherford T.S., Tulloch W.M., Sinha S., Byer R.L. Yb:YAG and Nd:YAG edge-pumped slab lasers. Optics Letters, 2001, vol. 26, no. 13, pp. 986–988. doi: 10.1364/OL.26.000986
19. Brown D.C., Benfey D.P., Gehm W.J., Holmes D.H., Lee K.K. Parasitic oscillation and amplified spontaneous emission in face-pumped total internal reflection lasers. Proceedings of SPIE The International Society for Optical Engineering, 1987, vol. 736, pp. 74–83. doi: 10.1117/12.938069
20. Sridharan A.K., Saraf S., Sinha S., Byer R.L. Zigzag slabs for solid-state laser ampliﬁers: batch fabrication and parasitic oscillation suppression. Applied Optics, 2006, vol. 45, no. 14, pp. 3340–3351. doi: 10.1088/0264-9381/25/11/114040
21. Mak A.A., Malinin B.G., Mit'kin V.M., Pankov V.G., Serebrjakov V.A., Ustjugov V.I. Diode-pumped solid-state platelet laser module. Patent RU 2200361, 2003.
22. Andreev S.V., Gubanova L.A., Putilin E.S. Metodicheskie Ukazaniya k Laboratornomu Praktikumu po Kursu Opticheskie Pokrytiya. St. Petersburg, SPbSU ITMO Publ., 2006, 150 p.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License